|"Be at war with your vices, at peace with your neighbors, and let every new year find you a better man." ~Benjamin Franklin~|
Location: Halifax NS, Can
Posted: December/29/11 at 8:10pm
Here is a quick check to insure your next ride is safe and trouble free...
To help you remember what to check, remember this acronym T-CLOCK, which stands for Tires,
Controls, Lights, Oil, Chassis and Kickstand.
These are simple, easy-to-access items that anyone who rides should be able to identify and check.
And despite the length of the list, you can probably check everything in about five minutes. Depending
on what you find, that could be the best five minutes you spend all day.
Tires and wheels
Since these are what separate you and the road, they're probably the most important things to look
over. A problem here will affect handling, sometimes severely.
Are your rims free of dings? Are your spokes tight and straight? Check pressures in both tires. Since
most manufacturers specify pressures for cold tires, this is the only accurate way to check them, as they
heat up quickly on the road, raising the pressure. Consult your owner's manual or call your tire
manufacturer's hotline for the proper pressures for your particular bike.
If you own multiple bikes, it may be difficult to remember all those different tire specs. And since this is
one of those critical things you should check often, you may want to make a checklist with each tire's
recommended pressure, then hang it on your garage wall, or anywhere that's handy.
While you're down there checking the tires, make sure you've got plenty of tread. You should have more
than 1/16 of an inch (get a gauge) Remove foreign objects that may have lodged in the treads, and
make sure there aren't any cuts in the tire. A scuff is nothing to be worried about, but if it's a deep
scratch, you might want to have it checked.
Controls and cables
A snapped throttle or clutch cable can leave you on the side of the road, so check them, Operate
anything connected to a cable and make sure that levers and cables feel smooth and don't bind. Apply
the front brake and push the bike forward. The brake should feel firm, and the front wheel should not
move. Check the rear brake in the same fashion.
Seeing and being seen are the two best ways to avoid unwanted incidents on the road, so making sure
your lights work is imperative to your safety.
Start by turning on your ignition. Are the headlight's high beam and low beam working? Does the
taillight come on? Does the brake light come on when you depress the brake pedal and lever? Check
left and right turn signals, front and rear. Remember that the cause of a malfunction here could be a
relay or bulb... Lastly, don't forget to check your horn.
Oil and fuel
Running out of gas is a drag, but since many motorcycles don't have gas gauges, it's a very real
possibility. Check the gas level in the tank, and be sure your fuel petcock isn't on "reserve," which could
leave you with a big surprise if you roll to a stop thinking you've still have gas in reserve. And don't forget
to reset the tripmeter every time you fill up.
Running out of gas can be inconvenient, but running out of oil can turn your bike into an inert display of
public art. Even some new bikes can use enough oil to be down a quart between oil changes, so check
it before every ride.
Though an improperly adjusted suspension may not seem critical, imagine your surprise as your bike
behaves differently in the middle of a curve because you forgot to reset it after picking up your friend last
Sit on the bike and rock it, making sure that everything moves smoothly and relatively slowly. If the front
or rear end behaves like a pogo stick, a trip to your trusty mechanic should be in your immediate future.
If you have an adjustable suspension, remember to read your owner's manual and adjust it properly for
the load you'll be carrying and the type of riding you'll be doing.
Kickstand and centerstand
The kickstand is a handy little item, it's what keeps your motorcycle off the ground. Make sure it's not
cracked or bent. Check the spring or springs. Are they in place, and do they have enough tension to
keep the kickstand safely up? Make sure the bolt is tightened up real tight..
Don't forget to look at the engine cut-out switch or pad, if so equipped.
If everything's in place and operating properly you're done, and you're ready to roll.
Enjoy the day!
|Forum Jump||Forum Permissions
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum